Search:





Page 8

License plate bracket installation instructions.

Gen 1 install:

Parts list:

  • Aluminum Bracket
  • 4 washers
  • 1" long Bolts
  • 4 nuts
  • (Recommended: Lock-tite. NOT PROVIDED)

1. Mounting on the lower grill:

  • i. Take the inside nuts and thread them down towards the aluminum bracket.
  • ii. Insert the studs into the lower grille and add the two outer washers and nuts on the back of the grill.
  • iii. Adjust the depth of the bracket for the plate to stick out using the nuts.
  • iv. Add a small drop of lock-tite to the nuts and tighen down to 14ft-Lbs.

2. Adding the licence plate:

  • i. Use the 1/4" bolts provided.
  • ii. AMERICAN PLATES: use the inside holes to bolt the plate to the bracket.
  • iii. JDM PLATES: use the outside holes and bolt the plate to the bracket.

Gen 2 Install:

Parts list:

  • Aluminum Bracket
  • 4 washers with 90 degree bends
  • 1" long Bolts
  • 4 nuts
  • (Recommended: Lock-tite. NOT PROVIDED)

1. Mounting on the lower grill:

  • i. Take the inside nuts and thread them down towards the aluminum bracket.
  • ii. Remove the outside nuts and insert the modified washers with the lips facing eachother.
  • iii. Reinstall the nuts.
  • iv. Insert the studs into the lower grille with the two outer washers.
  • v. Position the washers so that the lips contact the upper part of the plastic grille.
  • vi. Adjust the depth of the bracket for the plate to stick out using the nuts.
  • vii. Add a small drop of lock-tite to the nuts and tighen down to 14ft-Lbs.

2a. Adding the licence plate with factory plastic holder:

  • i. Use the 1" bolts provided.
  • ii. Use the inside holes and bolt the plate to bracket.
  • *note: with this option you cannot use JDM plates.

2b. Adding the licence plate without factory plastic holder:

  • i. Use the 1/4" bolts provided.
  • ii. AMERICAN PLATES: use the inside holes to bolt the plate to the bracket.
  • iii. JDM PLATES: use the outside holes and bolt the plate to the bracket.

ALL YEARS:
Make sure all nuts are secure and re-tighten in 50 miles.

Back


Specials   |   Advanced Search   |   Contact Us   |   My Account   |   Log In
Copyright © 2017 Custom xB Gauges Privacy Notice